Fuse for '35 Glove Box Clock

[flathead34]

I need to know what size fuse was used in the wiring harness for a '35 Borg glove box clock. I have a clock with the original harness but the fuse is missing in the 2-piece fuse connector. Thanks, Mike

 

[Ken/Alabama]

The ones Ive seen which were later models ,had a short 3 amp fuse in them.

 

[TerryOH]

AGA is the physical size 3.0 Amp is the electrical size.

 

[flathead34]

Thanks, I will look for the short 3 amp fuse. I will see if it fits in the connector. Mike

 

[Lincoln]

The fuse in my 1936 BORG clock measures 5/8" long and marked with "2-A-250-V", which suggests a 2 amp 250 volt rating.

 

[TerryOH]

The fuse size is usually twice the amperage draw of the device being fused. This will eliminate needless blowing of the fues from too small a size and allow the fuse to blow when there is a clear need for it. If 2A works for you great, if it ever blows and you can not fing a problem you may want to increase the size slightly.

 

[48JOHNPH]

I need a lead on the fuse cap for the clock

 

[TerryOH]

About the only place to find a fuse cap is on a used clock. If you find another source let us know.