Fulton Emergency Brake handle extension

B

Bryan Markell

Member
I have been told there was a Fulton accessory brake handle extension produced for the 41-48 Ford/Mercury car emergency brake under dash actuator. Would anyone have material or specifics on such an accessory? Bryan
 
Here is some photos of a Fulton accessory handbrake extension and a copy of one fitted to our 1932 Ford.
 

Attachments

  • Fulton Hand brake extension sold for $270 U.S..jpg
    Fulton Hand brake extension sold for $270 U.S..jpg
    49.1 KB · Views: 58
  • 1932 3W handbrake extension.jpg
    1932 3W handbrake extension.jpg
    59.7 KB · Views: 68
Hey Byron, I am not that familiar with 41 to 48 Ford/Merc . Is it the same as a 39 and 40 Ford e-brake, under the dash on the drivers side ? If yes, then I have a friend with an accessory handle for this style of e-brake. I can have him take a picture of it if the e-brake handles are the same from 39 on up .
 
32 V8, the assembly would be different but similar, a photo or two would be helpful particularly if I could see the mounting bracket and how the accessory handles functions. Thank you. Bryan
 
Here are some pictures of one that I have, but not sure if it would fit a '41-'48 Ford like Bryan is wanting. Has anyone else ever seen one that looked like this? In some of these pictures the ebrake extension is taped in an open position to overcome the natural spring force trying to close it up as shown in first several pictures.
 

Attachments

  • IMG_20151224_135759180(1).jpg
    IMG_20151224_135759180(1).jpg
    48.3 KB · Views: 48
  • IMG_20151224_135716449_HDR(1).jpg
    IMG_20151224_135716449_HDR(1).jpg
    52.6 KB · Views: 46
  • IMG_20151224_135632340_HDR(1).jpg
    IMG_20151224_135632340_HDR(1).jpg
    52.7 KB · Views: 51
  • IMG_20151224_135608393_HDR(1).jpg
    IMG_20151224_135608393_HDR(1).jpg
    56.7 KB · Views: 43
  • IMG_20151224_135542392(1).jpg
    IMG_20151224_135542392(1).jpg
    54.5 KB · Views: 42
  • IMG_20151224_135445046_HDR(1).jpg
    IMG_20151224_135445046_HDR(1).jpg
    60.4 KB · Views: 45
  • IMG_20151224_135316472(1).jpg
    IMG_20151224_135316472(1).jpg
    52.2 KB · Views: 35
  • IMG_20151224_135252541_HDR(1).jpg
    IMG_20151224_135252541_HDR(1).jpg
    57.2 KB · Views: 40
Last edited:
1932 V8, John and I have been discussing the unit you identified as the same as your friend has. I appreciate your comment. As a next step may we now try to find out how it attaches the brake actuating handle? Bryan
 
Hey Brian , Sorry for the delay in getting these pics of the handle installed. Here you go

Here is the handle
picture.php


Off Position
picture.php


Another view of the off position
picture.php


On position
picture.php


Side view
picture.php


I think these are neat and I am always interested in buying them. I have a couple cars that I would like to put them on. Hope this helps
 
Thanks for the pictures 32 V8,. That's definitely a different animal than the one I show above in my earlier post. Although, there may be a substantial part of mine that's missing, and needed in order to allow it to work on those year ebrake handles.
 
You must log in or register to reply here.
Back
Top