Fuel pumps, push rods and stands 32-53

36coupe

Well-known member
What are the different fuel pumps and what interchanges between them?
How many different push rods are there?
And how many different fuel pump stands?

What combinations work between years?
What issues can you get into mix and matching?
 
And you left out the starting point, the many different intake manifolds, which dictate pretty much all of the rest.
 
And you left out the starting point, the many different intake manifolds, which dictate pretty much all of the rest.

That’s what I’m wondering.
I thought there was only short and tall intakes (as in relation to the fuel pump stands)
I also thought there is only 2 different length push rods.
Only 2 different fuel pumps in how they mount to the stand.
2 different stand heights.
I have a 34 intake that I want to use on 59ab and fuel pump stands off of various intakes. Doing a mix and match.
 
All the fuel pump stands, 34-48 are the same height. There are differences, but they all mount the pump the same height from their base...Your 34 intake requires the use of the long push rod [8 7/8"]. Any fuel pump 34-48 will mount to any 34-48 fuel pump mount.
 
All the fuel pump stands, 34-48 are the same height. There are differences, but they all mount the pump the same height from their base...Your 34 intake requires the use of the long push rod [8 7/8"]. Any fuel pump 34-48 will mount to any 34-48 fuel pump mount.

Okay Thanks
 
I’m doing the same. Got an earlier Ford aluminum intake with the vacuum port for the helmet distributor since I decided to use it instead of the crab style one that came with my C59A. I actually purchased both style fuel pump rods as I was still not entirely sure what was needed with what and exactly which direction I was going at the time. Also, the original (long version) was worn as well.
 

Attachments

  • 64FA44FC-CB77-43A6-BD82-A20C0F24F79D.jpg
    64FA44FC-CB77-43A6-BD82-A20C0F24F79D.jpg
    59.3 KB · Views: 20
Back
Top