Fuel pump fitting

[flatheadfan]

Guys-

Does anyone know a source for male and female fuel pump fittings with a Ford thread and a barb end (for hose attachment)?

Thanks

Tom

 

[TerryOH]

Uncle Max and Vintage Speed both have the hose barb with a male end for the fuel pump, check out the link below.

http://www.stromberg-97.com/

 

[JWL]

The Ford female opening has a "special" taper seal angle which, as far as I know, is only available with the Stromberg-97 manufactured part.

 

[ken ct]

I too have the tapered nose fitting with the barbed end on them.Thread is same as carb inlet 1/2x20. It is not pipe thread which is what you will find in local auto parts stores.ken ct. These will fit the strom inlet fitting female end and the threads in a 94 type carb.

 

[Roger/Sacramento]

The stock gas tank also takes the same fitting.

 

[Jack E/NJ]

Re: Fuel pump fitting (to standard flare fitting)

These 1/2" x 20tpi fittings seem to have standard 1/2" x 20tpi 5/16" flare threads that accept flare-tube inserts for converting them to standard flare fittings. For example, the Stromberg inlet will accept a flare-tube insert for use with any 5/16" male flare adapter. Shown below is a 5/16" male flare x 1/4" mpt adapter & insert for converting a Stromberg female to 1/4" mpt.

Jack E/NJ