Fuel Pump Filter

Byron Warwick

Byron Warwick

Senior Member
Can someone post the NAPA number for the fuel filter that goes in the bowl of the '49-'53 flathead engine. Is this filter enough or is it just a screen?
The picture was my '34 pu in the homecoming parade at MacMaster U. For some reason one of the tires sprung a leak and we did not finish.
icon11.gif
Right rear looks a bit low. Byron.
Can someone tell me how to post my pictures bigger?
 

Attachments

  • LoadedMacM.jpg
    LoadedMacM.jpg
    16.7 KB · Views: 21
Napa #3039,you still need a spring under it and a good fitting cork gasket,screens,cork gasket,spring and filtercenter hole must be hogged out a little as it wont fit over the nub in the pump. Screen goes in first,then the gasket,then the filter,then the spring. Do this with the pump upside down,then slide the bail over the glass bowl and tighten the thumb wheel and your set to go.NAPA will only have the filter. I have the rest. ken ct.
 
Ken: I Have the cork gasket and the screen. I found the rubber gasket sealed better,and have used it although I have to replace it with a new one each time I remove the bowl. Am I better of to put an inline filter along side the frame, and before the pump?
 
You must log in or register to reply here.
Back
Top