Fuel injection reload

K

kerker

Junior Member
Enclosed pictures of my latest version Flathead. New EM-TRON Ecu
can tune each cylinder. Will take spark out of a cylinder that is detonating
and put it back in asap. 2 & 3 do not like each other and they will swap
detonation often. The EM-TRON recognizes it and tunes that individual
cylinder to stop the detonation. The cylinders can also be tuned with
pressure reading spark plugs. You advance the spark in a cylinder till the pressure falls off then retard a bit. You need a very good engine dyno
to accomplish these features. engine has 8 coils. Put 1400 miles on it the last 3 weeks and it has never ever been this happy.
French block 304 cu in Isky max 1 on 108 centers. 8 1/2 to 1 Com.
cranking pressure, 160 lbs.
 

Attachments

  • IMG_0895.jpg
    IMG_0895.jpg
    37 KB · Views: 232
  • IMG_0982.jpg
    IMG_0982.jpg
    48.9 KB · Views: 270
  • IMG_1006.jpg
    IMG_1006.jpg
    74.2 KB · Views: 225
  • rod shot.jpg
    rod shot.jpg
    70.9 KB · Views: 189
Kerk,
I er ah huh well damn..............what about those heads. Access to a
dyno ? How about the HP. History meets technology !!
Charlie ny
 
Really nice work. I love your crank trigger ignition Did you do the machine work? It looks as good as it works I bet. Are you running a intercooler or is that just your intake .
 
Hello Quickchange
To answer your question, I do all the machine work. The item that looks like an intercooler, is a plenum. It sits on top of the original throttle bodies that I
removed the throttle plates and made smooth runners. I had developed the runner lenght earlier and didn't want to mess with it. It cold starts before the belt makes a loop. We will be installing the cruise map this week. It will have a
town map and a highway map. Just flip a switch. I am looking to swap of the C4 for a 4 or 5 speed. It will pull more gear even with the Columbia engaged.
Dick in Havasu Az
PS Enclosed picture of another build that might interest you.
 

Attachments

  • DSC00368.jpg
    DSC00368.jpg
    52.4 KB · Views: 184
Kerker , Your work is killing I am very impress with both cars, Your attention to detail is off the chart. I am working on a Ardun in my shop for my latest project. I have been trying to get the correct intake runner length for the side draft Webers going on the Scott blower . I have the base plate and plenum made working on runner lenght I wish I was smart enough to do fuel injection. Its even more efficient than webers.
 
I think an engine management system is the future of our old engines. They need not be designed for preformance, but economy and reliable operation with present day fuels. A stock engine wuld always be in proper tune under any operating condition. The best of both worlds. I understand someone maked a throttle body that looks like a Stromburg 97. Can't beat that with a stick.
 
Hi Charlie
Is this the Charlie I know in Denver? here is the finished Hollywood.
All work done in the shop. Bumpers, grille windshield frames etc etc all
fabricated in the garage. Fully independent ride.
Dick
 

Attachments

  • B&W Hollywood-1.jpg
    B&W Hollywood-1.jpg
    111.4 KB · Views: 42
Regarding the crank trigger in the first photo posted, what is the purpose of the gap at the 1 o'clock area?
 
Hi Mike
The gap tells the computer the position of the crank relative to firing #1
every 720 degrees. The slots on the front of the wheel are for turning the engine
with a custom spanner wrench.
 
I get it...I'd counted the teeth and figure if two more were there, you'd have 24...and maybe using some sort of waste spark on other cylinders...man I over thought it..lol!

Awesome work you've done there.
 
I am a techno junkie. I love bells and whistles, however the computer driven injector seems out of place on a flattie. g
 
You need a sensor on the camshaft so the engine knows where Number 1 cyl is,on the set up my boy made for his 6 cal holden engine he made on to fit inside the cam gear.
lawrie
 
You must log in or register to reply here.
Back
Top