Found One:

JBR

JBR

Senior Member
City
Humbodlt
State
Iowa
Need a decent 29 commercial headlight shell for a pickup. One with good tight rivets.

I would take a matching pair, but really only need one.
Jon Reed
jbr@mediacombb.net
515-332-1335
 
Last edited:
Re: 29 commercial headlight shell:

I dont know if this will help you, if you have a bucket, with loose rivets, some of the supply house sell a bolt with a rivet like head, once installed it looks close to the original rivets, only will have nuts inside the bucket. Brattons is one, have thought about getting a set for the stainless buckets i have that somone welded the mounting stem to the internal bracket.
 
Re: 29 commercial headlight shell:

Steve,
That's the problem I have. One of my shells has the bolts in it instead of the rivets. It vibrates real bad when the motor is running. I tried to tighten the bolt but that didn't help. All I managed to do was break one. The other thing is it is a 28 shell. I would like to have a matching pair if possible.
Jon
 
You must log in or register to reply here.
Back
Top