Archie Cheda
Member
- City
- San Luis Obispo
- State
- CA
NO LONGER NEED ONE . . .
Want one .030" (or .040") late-style Model A connecting rod to fill out a set. I will be boring & scraping the babbitt to fit a .030" under crank. The rod's babbitt should be usable -- no cracks or missing bits. I will be re-bushing the small end, so bushing condition is not critical. Rod must be fairly straight, i.e.: must pass a visual test for straightness.
Thanks,
Archie
Want one .030" (or .040") late-style Model A connecting rod to fill out a set. I will be boring & scraping the babbitt to fit a .030" under crank. The rod's babbitt should be usable -- no cracks or missing bits. I will be re-bushing the small end, so bushing condition is not critical. Rod must be fairly straight, i.e.: must pass a visual test for straightness.
Thanks,
Archie
Last edited: