Ford Y Block Intake Manifold Heater Bypass Fitting

all american boy

all american boy

Well-known member
y blockers

'now here's something you'll really like!'-Rocky J. Squirrel

i think it's a heater bypass fitting, had to put something in title.:)

anybody seen one like this?

it has tire air valve fitting on top.

the tube from air valve seems to go down to

the lower 1/2-5/8" hose neck in thermostat housing.

in the middle pic, yeah i did cut off bottom where

the passage for thermostat small neck is, it's there.

have a nice day!
 

Attachments

  • Ford 292 Intake Manifold Heater Bypass 002.jpg
    Ford 292 Intake Manifold Heater Bypass 002.jpg
    32.4 KB · Views: 49
  • Ford 292 Intake Manifold Heater Bypass 001.jpg
    Ford 292 Intake Manifold Heater Bypass 001.jpg
    26.7 KB · Views: 39
  • Ford 292 Intake Manifold Heater Bypass 003.jpg
    Ford 292 Intake Manifold Heater Bypass 003.jpg
    40.3 KB · Views: 39
Last edited:
ronny

that camera is perfectly fine buddy.

learn to read, it says what it is.

if you don't know anything about the valve

stay out of it.

good luck
 
Let's see. You don't know what it is, you ask if anyone seen one like it. Then you post pictures that we can't see, then say

"that camera is perfectly fine buddy. learn to read, it says what it is. if you don't know anything about the valve stay out of it. good luck" ???

You've got issues, Dude. I don't know why anyone would even attempt to help you after that... not that you would listen anyway.

Oh, and have a nice day!
 
master cylinder

from your past posts in my threads if

you don't help me that means:

i won't hear any more of your insults

there won't be any more of your chicken little the sky is falling

type, naysaying, sandbagging remarks.

'help, watch or get out of the way.'

have you heard that before?

ok, Master Cylinder don't help me, i'm pretty sure

i can get through without you.

i KNOW i'll enjoy it more.

have a nice day!
 
Last edited:
all american boy said:
ronny

that camera is perfectly fine buddy.

learn to read, it says what it is.

if you don't know anything about the valve

stay out of it.

good luck
Click to expand...

First off How can you assume I am your buddy??
I can read and very well.
Don't also assume I am ignorant to the valve.
And lastly this is an open forum.Who are you to say stay out.
If you don't agree with some postings then don't reply.
Simple isn't it! :D

R
 
y blockers

Master Cylinder has a Lion's Drag Strip logo on his

thing on another forum.

i looked it up and it closed in '72, so if he went there

with a car, he's kind of an old guy by now.

i feel like a rat for yelling at him.

have a nice day!
 
MasterCylinder has more knowledge and experience than you will ever get together. Be more respectful, and accept advice given. Or go it on your own, in which case this or any forum wouldnt be for you. That would not be the best choice if the engine ever gets to a real point of machining and rebuilding.

The pictures are impossible. They are taken too close to subject. But you probably know better.
 
Last edited:
y blockers

i saw another manifold and it looks like this

fitting is a petcock like on the side of blocks.

on mine the T handle on top is broken off.

have a nice day!
 
Last edited:
You must log in or register to reply here.
Back
Top