Ford o matic rear bush

[Blackpearleb434]

Hi, I'm after a part number of the rear bush and seal for the extension housing on a ford o matic transmission. ( three speed, starts in second and has kick back to first or low gear on the colum. The transmission is in an Australian 57 ( your 56 ) ford Customline. It seems that I have three choices of bushes so would like to get it right the first time as I can't find one here in oz.

Thanks in advance

Norm

 

[rick55]

According to the parts catalogue the part you need is http://www.macsautoparts.com/ford_m...-housing-bushing-ford-and-mercury-389169.html
This part has the same part number for manual and auto . Fits 6cyl and v8 except 312 station wagon and courier.
It is part number B3TZ-7A034-A. It is actually used through from 1949 - 1971. Macs have it for US$7.95. Have you tried Bill in NSW.

 

[Blackpearleb434]

Thanks Rick, is this the same for the seal?? i.e fits from 1949-71

Cheers

 

[rick55]

Norm I don't get on here that often these days. Yes it is the same seal from 51-71. You will find it is the same seal for a C4 and probably FMX locally. I just fitted late model Fordomatic to my ute and had to use a C4 yoke as it had a fine spline output shaft.
Here is the listing from Macs
http://www.macsautoparts.com/ford_m...pt-312-with-dual-4-barrel-or-supercharge.html