Ford 1940 innerfender

I think in back it only bolts to the fender. There should be a bolt and rubber bumper near the brake line cut out. There may be early/late differences as well. Kube will have the correct answer.
 
Hello and thanks for answer... the problem i see now is that idont have any holes in the back, Do any have some pics?

Thanks
 
If the inner fender is a used one the portion of it with the bolt hole in it may have cracked and broken off.
 
Here's how the fender brace in the right rear fender looks. Click on photo to enlarge. I don't think the 1/4-20 nut, bolt and washers shown are stock 1940 OEM.
 

Attachments

  • IMG_5137b.jpg
    IMG_5137b.jpg
    97.1 KB · Views: 72
  • IMG_5138b.jpg
    IMG_5138b.jpg
    105.8 KB · Views: 63
  • IMG_5139b.jpg
    IMG_5139b.jpg
    102.8 KB · Views: 58
  • IMG_5140b.jpg
    IMG_5140b.jpg
    54.9 KB · Views: 57
  • IMG_5142b.jpg
    IMG_5142b.jpg
    97.1 KB · Views: 55
Here Is a picture of the inner fender brace for the front, this one is hand made but looks close and gives you an idea. Originals would have a bead rolled in the shape of an "X"
These go behind the front tire.

 
Hello and thanks for the help not many 40 in sweden ...
front innerfenders are not bolt to frame? only one bolt to the mudflap in the back?
 
The inner fender does bolt to the frame, it's bolted on with 4 bolts and one of the bolts is shared with the fender brace/mud flap. The mudflap is fastened to the fender with 2 bolts. Hope this helps.
 
You must log in or register to reply here.
Back
Top