FoMoCo Spark Plug Wires???

[Bertha]

Has anyone found a reliable source for the OEM style wire set?
I tried a set from Dennis Carpenter and it turned out to be junk.
Every moulded end was filled with excess rubber and required clean out with a Dremel Tool. Three split when put on and all the ends had to be crimped to snap on the plugs. Everything available from other suppliers that I've checked looks to be from the same Mfg.

Bob

 

[skidmarks]

I use a set from carpenter and they were fine.

 

[V8COOPMAN]

Roy Nacewics plug wires are about as good and exact as they get. Click the link below. DD

http://www.fordscript.com/ford_bolts/contact.html

 

[rufus39]

Could not agree more...Roy's plug wires are as good as it gets.

 

[Bertha]

But I don't see a set for our 53 Victoria

I'll call.

Bob

 

[Bertha]

Rat's.....

Bob,
I'm sorry, we have never done the 49-53 wires. I am aware of the "less than desirable" stuff that is out there but cannot help.
You can find our offerings right on line at http://www.fordscript.com/ At the home page, choose the hardware section and then open up the 49-53 catalogue.
Hope this helps!
Roy

Bob
BTW...the oil filter I got from DC, made in China.