Floor board drawings

1930.68B

1930.68B

Senior Member
I have the drawings by Steve Watrous for the lower front floor board but it appears to have missing dimension. I have drawings form other sources but they are all missing this dimension.
Does anyone have the dimension that is hi-lited on the attached dwg.
Thanks
 

Attachments

  • Lower Front Floorboard 1.jpg
    Lower Front Floorboard 1.jpg
    44 KB · Views: 226
If you cut it to 5 1/2 inches you will be really close. Here is the idea: The total width is 16 7/8. Looking at the left side, there are two measurements, one of 4 19/64 and one of 7 5/64, which appears to be very close to the line you are looking for. 4 19/64 + 7 5/64 = 11 24/64 = 11 3/8. With the total of 16 7/8 - 11 3/8 you end up with a 5 1/2. Which looks like where you would like to be.
 
1930.68b said:
i have the drawings by steve watrous for the lower front floor board but it appears to have missing dimension. I have drawings form other sources but they are all missing this dimension.
Does anyone have the dimension that is hi-lited on the attached dwg.
Thanks
Click to expand...
6 9/16" (6.5625)
 
In the first drawing, lay a straight edge along the witness line at the top of the 4 19/64" dimension line and does not line with cut out in the center of the floor board.
Mike, thanks for the view showing the 5 11/16" dim. I'll add it to my drawing.
 
You must log in or register to reply here.
Back
Top