flathead two/two intake with stock generator

T

tony howell

Senior Member
Would anyone out there know what two/two intake....that I could possibly run with....two 34 ford air cleaners (6-1/2"each across) and with my original generator???????Thanks fordbarners
 
Thats a hard combination to get working.
Regulars take the alternator but the carb spacing is 4 and some...
Super intakes can take the aircleaners but not the generator.
Offset mount the generator and run the wide spaced super intake...thats as close as i can think of getting that combination.
 
I had three 2x2 high rise intake manifolds in mind to suggest until I read you want to use two '34 air cleaners. Unless you do something clever like PeterC did on his 35 3w coupe by combining two 34-36 air cleaners into one very cool looking air cleaner, what you want to do seems impossible to me as well,....UNLESS....you design and make your own intake manifold that will do all the things you need to make this happen.
 
Last edited:
The only intake I know of is the Hexigon intake. They are very rare. The carbs mount backwards on the intake. I have one but I choose to just "look at it" periodically.
 
Ah, yes the ever elusive Hexagon air cleaner.
Two of these should do the trick.
 

Attachments

  • hex1.jpg
    hex1.jpg
    162.4 KB · Views: 61
I run a Hexagon Tools Intake on my 41 along with an original air cleaner ( the one above is not anything like the original dual carb cleaner - performs very well and no issues with the factory generator

This oval cleaner is what the Hexagon unit looks like.
 

Attachments

  • image.jpg
    image.jpg
    49.3 KB · Views: 33
If I understand you correctly, here are a couple ideas ....

I believe there is an Edelbrock intake that spread the carbs out and you needed a special adapter to run the generator off of one of the heads. That would work I think but I do not have one to check the spread between them.

You may also find a "Y" adapter to place two carbs on a stock intake that would have enough of a spread between them to run the air cleaners and still run your generator. If this floats your boat you just might have to make your own to get enough distance between them.

Another possible option is that some time ago I saw an adapter, or a design of one, or someone who had made one as a one-off, that placed two carbs on a stock intake to the left and right. Basically turning the "Y" adapter 90 degrees.

One final thought is that there are carb spacers that come in 1,2, and 4" heights. Knowing this could help you take an intake you find and stagger the heights of the carbs (perhaps use progressive linkage if the intake hopefully has a dual plenum to make tuning easier), and your air cleaners may have clearance enough due to the staggered heights.

Hope this gives you some ideas .....
 
Tom - The Edelbrock Slingshot is a great intake and you can use the stock gen mount. The new Edelbrock Slingshot is a nice option over the rare originals
 
1963turnerjohn said:
I run a Hexagon Tools Intake on my 41 along with an original air cleaner ( the one above is not anything like the original dual carb cleaner - performs very well and no issues with the factory generator

This oval cleaner is what the Hexagon unit looks like.
Click to expand...

I have this set up too. One of the best looking air cleaners IMHO.
 
51 MERC-CT said:
Ah, yes the ever elusive Hexagon air cleaner.
Two of these should do the trick.
Click to expand...

One problem I see with this idea is it is nowhere near this part of the question : " ....that I could possibly run with....two 34 ford air cleaners (6-1/2"each across) " . On the other hand , I've never seen that version , I've only seen the oval one that is also shown
 
uncle buck said:
One problem I see with this idea is it is nowhere near this part of the question : " ....that I could possibly run with....two 34 ford air cleaners (6-1/2"each across) " . On the other hand , I've never seen that version , I've only seen the oval one that is also shown
Click to expand...
Sure looks like it addresses post #6, or did you miss that? Or even posts #8 and #9?
 
After thinking about it, you can flatten or cut and patch the two parts that meet. Only the trained eye would notice they are touching or modified. Hot rodding engineering I guess.
 
34PKUP said:
Sure looks like it addresses post #6, or did you miss that? Or even posts #8 and #9?
Click to expand...

No I read post 6 ,8 and 9. it Post 6 talks about the hexagon intake being a possible fit. Don't get me wrong, I enjoy seeing all the cool speed equipment for flatheads and I. Even have one of the Hexagon intakes mentioned. The original poster stated he wanted a 2 x 2 intake that would clear a generator and be able to use 2 of the 34-36 air cleaners is how I read the original question so I must be too much of an idiot to understand it . For what it is worth , the Hexagon intake I have mounts the carbs on approx a 5" center to center and the 36 air cleaner is approx 7" round.
 
As Mart said, I think your asklng the impossible. I had an Edelbrock 2 X 2 intake which ran the generator in the stock location, but the carbs were close together and you would not be able to run the stock air cleaners on it. The intake was not a slingshot. I found a picture of the set up.
 

Attachments

  • t4.jpg
    t4.jpg
    80.3 KB · Views: 50
Last edited:
You must log in or register to reply here.
Back
Top