Barn Junk
Well-known member
- City
- Tri-Cities
- State
- WA
- Price
- In Ad
These are some nice parts to convert or get a damaged trans back on the road. I also have a lot of other early Ford trans parts including some complete units if you have some other needs.
#1 - Matched Gear Set, 28/16 Tooth Set
These gears are for use with 1939up Type Syncro
Real nice set of gears with very little wear and no chipped teeth. Includes 16T main drive, 28T,24T,18T,14T cluster (uses 2-piece,2 slot rear bushing/washers), 29T low and 18T rev/idler gears. SOLD
#2 - Open Drive Conversion
All the parts to convert a closed drive trans to open drive. Includes speedo gears and yoke. Nice condition. $165
#3 - Bare Trans Case
# 78-7006-B from a 1946 Ford pickup but will fit 1932-48 pass and up to 1951 pickups when using a floor shift. Has more room for a larger cluster and larger pressure plate than earlier models. Nice condition, without repairs. No cracks, bushing surface wear or other problems. $90
#4 - 81A-7222 Shifter Top, 91A-7230 Fork / Handle
This is the unit for use with the 1939up type gears and trans parts. Nice condition, complete and works smoothly. Shifter assembly without handle $170. Handle additional $50.
Prices plus shipping but can be picked up, no extra charge, in Puyallup, WA or at the Monroe, WA swap meet after Oct 12.
#1 - Matched Gear Set, 28/16 Tooth Set
These gears are for use with 1939up Type Syncro
Real nice set of gears with very little wear and no chipped teeth. Includes 16T main drive, 28T,24T,18T,14T cluster (uses 2-piece,2 slot rear bushing/washers), 29T low and 18T rev/idler gears. SOLD
#2 - Open Drive Conversion
All the parts to convert a closed drive trans to open drive. Includes speedo gears and yoke. Nice condition. $165
#3 - Bare Trans Case
# 78-7006-B from a 1946 Ford pickup but will fit 1932-48 pass and up to 1951 pickups when using a floor shift. Has more room for a larger cluster and larger pressure plate than earlier models. Nice condition, without repairs. No cracks, bushing surface wear or other problems. $90
#4 - 81A-7222 Shifter Top, 91A-7230 Fork / Handle
This is the unit for use with the 1939up type gears and trans parts. Nice condition, complete and works smoothly. Shifter assembly without handle $170. Handle additional $50.
Prices plus shipping but can be picked up, no extra charge, in Puyallup, WA or at the Monroe, WA swap meet after Oct 12.
Attachments
Last edited:
