Billy 1931 Model A
Member
Where can I buy the handsome little mounting for the front center bumper for three small American flags? Flags spread out 10:00 noon 2:00?
flags for front bumper
- Thread starter Billy 1931 Model A
- Start date
nkaminar
Well-known member
Here is one for the hood: https://www.snydersantiqueauto.com/product.htm?pid=982927&cat=0
Y-Blockhead
Well-known member
Looks like the center bumper clamp.
ModelA29
Well-known member
Thanks for the reminder I needed to order one for our new Tudor. Get the flags on ebay too. I bought 100 for about $20 last year. Take some wilhold glue and paint about 1/8" of the back edge of the flags to keep them from fraying.
This one holds 5 but you could easily use it for 3 - FleaBay https://www.ebay.com/itm/1617742235...KHH8/FI5Qa2Sq4elbwvmcCUnA=|tkp:Bk9SR_LYmYHRZQ
This one holds 5 but you could easily use it for 3 - FleaBay https://www.ebay.com/itm/1617742235...KHH8/FI5Qa2Sq4elbwvmcCUnA=|tkp:Bk9SR_LYmYHRZQ
Cape Codder
Well-known member
These are the Flags I have for Tessie !
The staff's are 30" of 1/2" Alumium solid Rod. The Finial or top of the Staff is Solid Brass 2 1/4" high. I had bought the attachment points only to find they were too small so the machienst made them also. Flags are 12 1/4" High by 19" long with embroidered Stars. Strips are Double Stiched on the length and quadruple at the end.
The staff's are 30" of 1/2" Alumium solid Rod. The Finial or top of the Staff is Solid Brass 2 1/4" high. I had bought the attachment points only to find they were too small so the machienst made them also. Flags are 12 1/4" High by 19" long with embroidered Stars. Strips are Double Stiched on the length and quadruple at the end.
Attachments
Cape Codder
Well-known member
Sorry for responding as I just re-read the original post and the question asked was for the CENTER FRONT BUMPER ! So my info is no good to him!
Y-Blockhead
Well-known member
Cape, It’s all good info to me so no need to be sorry.