Finally broke it...

[KCTA Chris]

I figured it was time, and knew whatever I parts that were packed certainly wouldn't be the right one. But after 2 years and Lots of driving she finally let go on the road last weekend. As I headed south to the HAMB drags the motor quit, diagnosis by disassembly reviled the one thing... Timing gear.

My fault, I used a NOSR part that was of unknown history. Not too bad though, I had a place to park 4 miles away from the breakdown. I called a friend at the Springfield swap meet, who picked up an new gear from a vendor. Enjoyed the drags and reinstalled the gear sunday morning with simple tools and hit the road.

Most folks would be a upset but this is the first time it needed a little help to get home. I can't complain at all. I've driven this every week since I built it, It's been beat on, hauled kids, lumber, trees, camping equipment and taken our family to secluded fishing hole, even been a parade or two. I've never thought twice about driving across a few states.

Don't know what it is about an "A" but even in the adventure I still had a smile.

 

[H. L. Chauvin]

Chris,

Not just A's -- had a most important out of town meeting to attend to one week day morning. Got in my then new 74 Pontiac, with only about 3,000 miles.

Drove 5 feet -- engine died & would not start -- teeth on fiber gear sheared off -- after thinking, lucky I was not in heavy, fast moving multi-lane metro traffic.

FWIW, for safety, with today's different weaving & faster driving styles, never a bad idea to install an all metal gear in one's Model A.

 

[grapp]

That's mighty nice truck...glad it was a simple fix!~

 

[Rusty Homestead Fl]

Hey Chris
How do those friction shocks work for ya? Can you notice much difference over no shocks at all ? I let a set pass and wondered if I should have jumped on them.

 

[KCTA Chris]

The friction shocks are ok, not the same ride as hydraulic but do the job. Since I was building fenderless I choose look over the comfort. You can adjust them with noticeable difference in ride quality but still not great. I live off gravel roads and drive a little too fast so they do get a work out. In comparison a friends truck with similar chassis and properly restored shocks makes mine feel choppy, his rides like a Caddilac up front.

I only run them on the front, I have the cast Offy style on the rear but those are dummies. Hidden underneath are air shocks so I can alter bed height and ride depending on load. - Old moonshiners technology

 

[SeaSlugs]

these fiber timing gears, ive seem to have read alot of posts about them breaking lately.

since my engine isn't in the truck yet would it be very wise to put an all metal one in its place now?

 

[Randy in Illinois]

Lately the timing gear in my car has been making some noise too. If I push on the gear with the timing pin the noise goes away. I want to wait until the summer over before I replace it with a metal gear. (fiber gear in there now)

 

[Purdy Swoft]

Metal timing gears are forever!!! Truth be known, replaceing the timing gears is one of the worse PITA jobs that I can think of. I'd rather replace the transmission, anyday than the timing gears. I only use the metal gears.