FH pressure test

I haven’t found the adapter the fits on the radiator neck for my 34, 36 or 37 in ANY pressure test kit.
 
I think most people referring to a pressure test kit for a flathead V8 are wanting to perform the test on a bare block. This involves some specialized test plates. Speedway has carried these kits in the past, but they have been 'out of stock' for a number of years. You can follow my attempts on a thread here called 'Testing Blocks at Home'. Now that it's winter I plan to get back and finish up my test kit.
 
Kind of off topic but still a pressure test. 1962, while hauling 2 tons of hay across the Mojave Desert in my Dad's 1/2 ton '50 International pickup the upper radiator tank developed a pin hole leak. No tools or supplies so I stopped & cut a mesquite branch, whittled it to a point & stuck it in the hole. Made it 35 miles up the mountain to Big Bear Lake with no problem. I guess it passed the test! Local radiator shop fixed it for $5.
 
I just had a 21 stud "pressure testing" plate made to locate a combustion leak into my cooling system. I have Speedways 24 stud plate, but needed the 21 stud. Mine is 1/2" thick, with a 1/4" rubber gasket. I just used it, and discovered a pin hole in the combustion chamber, barely visible!! I can have these made for $250. Let me know!!
 

Attachments

  • DSCN2134[1].jpg
    DSCN2134[1].jpg
    44.1 KB · Views: 184
  • DSCN2135[1].jpg
    DSCN2135[1].jpg
    28.1 KB · Views: 179
whygoby said:
I just had a 21 stud "pressure testing" plate made to locate a combustion leak into my cooling system. I have Speedways 24 stud plate, but needed the 21 stud. Mine is 1/2" thick, with a 1/4" rubber gasket. I just used it, and discovered a pin hole in the combustion chamber, barely visible!! I can have these made for $250. Let me know!!
Click to expand...
530392


530393
 
Doug


Fortunately one of my good customers has a water jet cutter, he had his guy cut me a set of 21 stud plates and neoprene gaskets for me for a 12 pack of beer. I should have had a set cut for the 59 series but didn't. Hopefully I can get some done at some point!!!
 

Attachments

  • Pressureplate1.jpg
    Pressureplate1.jpg
    48.4 KB · Views: 183
  • Pressureplate2.jpg
    Pressureplate2.jpg
    53.2 KB · Views: 180
rockfla said:
Doug


Fortunately one of my good customers has a water jet cutter, he had his guy cut me a set of 21 stud plates and neoprene gaskets for me for a 12 pack of beer. I should have had a set cut for the 59 series but didn't. Hopefully I can get some done at some point!!!
Click to expand...
530394


530395
 
Ggmac said:
Nice ! But I see that sawzall in the back ....
Click to expand...

Lol, IF you are implying I cut them myself with a sawzall, look close at my cut lines, IF I cut that clean with a sawzall I could make millions cutting for people, especially the 1/8 neoprene gaskets I cut with it!! NOT to mention the bolt circles

Actually the sawzall is there as I took this picture at work, the guys in my warehouse were using it to cut up pallets and broke the blade guard and brought it up to me so I could get it fixed!!! Truth be known!!
 
You must log in or register to reply here.
Back
Top