cuzncletus
Senior Member
- City
- Waynesville
- State
- Ga.
- Price
- in ad
CLeaning out my garage and I've got some good take-off parts from my 416 FE. It was a strong street motor but I decided to go with a hotter roller cam. What I've got left is a set of adjustable valve train push rods, 16 and all good and straight. $25. Manley valve springs and retainers, take-offs from my Edelbrock heads with less than 2000 miles. Support up to .600 lift. Excellent. $50.
2800 stall converter (I went to a 3800), less than 2000 miles. Excellent. $150. Mallory Distributor with Pertronix conversion. $100. Chrome baldie valve covers, unused (wouldn't clear my rockers and girdle). $20. 750 Holley vacuum secondary carb w/ quick change spring kit, no choke, jetted for the above 416. Ran great. $125. All these parts were in an FE that ran 13.6 at 106, spinning badly off the line. Low miles and all parts ready to go into another motor. Buyer pays shipping.
2800 stall converter (I went to a 3800), less than 2000 miles. Excellent. $150. Mallory Distributor with Pertronix conversion. $100. Chrome baldie valve covers, unused (wouldn't clear my rockers and girdle). $20. 750 Holley vacuum secondary carb w/ quick change spring kit, no choke, jetted for the above 416. Ran great. $125. All these parts were in an FE that ran 13.6 at 106, spinning badly off the line. Low miles and all parts ready to go into another motor. Buyer pays shipping.
