Exhaust Mounted Engine Stand

[Phil Gillespie]

Have just got one of these engine stands. But need to make an adaptor for a side mount at exhaust. 91 A block. Somewhere I recall reading that the bracket is angled at 45 degrees to horizontal pivot on stand.
Am I right.
Phil NZ

 

[flatheadmurre]

Yep you got it right.
Piece of flatiron use a exhaust manifold as drill pattern.

 

[JSeery]

One way to do it is with a section of angle and a flat plate. Here are some examples.

 

[Phil Gillespie]

One way to do it is with a section of angle and a flat plate. Here are some examples.

Thanks J Serry. Thats another option with the angle iron for added strength.
Phil NZ

 

[35ragtop]

Or if you like your woodwork, you could build one of these, as one of our enterprising 84 year old members did. It worked perfectly and so far he has assembled two engines on it. He does admit that the cutouts for the exhausts were not necessary .
What you can achieve with a bit of ingenuity!

 

[JSeery]

I fab'd one so that it would bolt to my existing plate on the stand vs to a piece of tubing.

 

[early46]

Here is one I built, works very well

 

[Phil Gillespie]

I really appreciate all the various ideas on this item and they are all good info.
The adaptor to the original which bolts on I'm liking.
Phil NZ

 

[Capn John]

https://www.stumpysfabworks.com/store/c1/Featured_Products.html

 

[Phil Gillespie]

https://www.stumpysfabworks.com/store/c1/Featured_Products.html

Have similar being made up here in NZ. Problem as with most good price locally in US but time its shipped to NZ could be extra $70 to $90 .
Phil NZ