Engine question

[372dart]

Hello, I'm putting a B-cam in my 29, where sould I set the vavles??

 

[Mike V. Florida]

Jim Brierley states "On my reground to B spec cams I recommend .012" & .014", same as I set an original Ford B cam."

 

[CarlG]

If that is a new Bill Stipe 330 "B" cam, he says to set them both at .012

 

[columbiA]

All A & B intakes .010 to .013",A exhaust .015 to .017". B exhaust .020 to .022".This is for stock B cam & original valves.This info from the back of an original Ford ruler.Modern valves may require a different setting.

 

[Jim Brierley]

See Mike V. (above)

 

[372dart]

Thankyou guys for the advice, should finish it up the next few days.