engine oil pump

Tom,

Here is a photo of the one out of my early 1929.

Seth
 

Attachments

  • pump in pieces for fordbarn.jpg
    pump in pieces for fordbarn.jpg
    61.4 KB · Views: 37
Purdy,
Thanks for the reply and that was my concern about using a gasket too. Plus the Champion W18 plugs you advised in a different thread are doing great although I haven't pulled them yet to check the insulator color but, is running great so far. Also, my head gasket replacement seems good since I didn't see any water/coolant in the oil.

Thanks again!
 
leatherback1929 said:
Purdy,
Thanks for the reply and that was my concern about using a gasket too. Plus the Champion W18 plugs you advised in a different thread are doing great although I haven't pulled them yet to check the insulator color but, is running great so far. Also, my head gasket replacement seems good since I didn't see any water/coolant in the oil.

Thanks again!
Click to expand...

I'm glad that the spark plugs and headgasket are working good. On the lower oil pump plate, check for wear marks where the gears may have worn the plate. If wear marks show you can clean and just turn the plate over. This is what I do when I rebuild them . Good luck.
 
You must log in or register to reply here.
Back
Top