Engine not starting - checked everything - no more idea

[hazelhoff]

I had the same thing after rebuilding the engine. Everything was OK, but it did not run !

Finally checked the camshaft timing. That was completely wrong, 10% off !

Do check the timing, cam gear dot to the right edge of the crank gear peg.

Wish you luck !

Henk

 

[Ray64]

Did you paint the engine and leave tape over the intake and exhaust holes? I did that

 

[Michael_Velling]

The car runs fine, tried it for a ride about 25 km - last week. This weekend heavy rain here near the dutch border.

@Henk / Hazelhoff: Did you send the rain?

Michael

 

[McMimmcs]

Okay, but mechanical must the fuel go into the combusion chamber and there is no fuel. The electrical problem may come then when fuel is in the cylinders.

Michael Velling
Germany
www.velling.de

Did you not recently have it running ?

 

[tuneman]

I would suspect the gav needle is broke off at the tip ,with a new needle inserted into it. thus working as though the valve was turned all the way in. there beirng no adjustment.

 

[Chuck Sea/Tac]

I don’t understand why everyone keeps trying to solved a now nonexistent problem!?

 

[McMimmcs]

I don’t understand why everyone keeps trying to solved a now nonexistent problem!?

That was why I asked two posts back if he had it running.

 

[hazelhoff]

The car runs fine, tried it for a ride about 25 km - last week. This weekend heavy rain here near the dutch border.

@Henk / Hazelhoff: Did you send the rain?

Michael

Of course Michael. There is a lot of good stuff coming from Holland

Grusse,

Henk