Engine install

Larry H

New member
I will be shorly installing my engine and transmission back in my 31 A. I removed the engine and then went back and pulled the transmission out. When I install is it best to put the transmission in first and then the engine or as a unit.
 
If at all possible, put them in as a unit. You will be able to a better job on the "workbench" than wrestling with the transmission under the car. Then you can slide the rear end under the car, hook everything up and go for a ride!

Wait to put the fluids in so they don't cause a problem when the engine/trans is at the angle you will need to get everything under there.

Good Luck

Chris
 
This question seems to rank with what oil to use. No agreement. Like Tom I do transmission first then engine. I use heavy wire hooks to support the trans from the motor mounts. Then it's easy to move the car while installing the engine. Using a jack to support the trans will just frustrate you.
 
Larry, Some information concerning this matter can be found on a recent thread "Model A Engine Removal From Car" started by Rubatoguy on 9-18-12. I hope that this info. will be helpful.
 
Back
Top