Engine and ****** rebuilders

[t42]

Does anyone have any recommendations for good quality engine/transmission rebuilders in the MN. area. I had a few names, but the file got misplaced.

Thanks in advance.
Skip

 

[Farmallcub49]

I have done 7 so far, 4 in the last 6 months, with no complaints. I currently have 3 to do this winter, but could squeeze you in.

Andy

 

[J and M Machine]

Hello Skip: We aren't from MN but recently have done two engines from the same customer in Zumbrota,MN if you email me I can give you his phone number and name and you can talk to him about it. The shipping is very reasonable.
We are also the makers of the new transmission drums/crankshaft pulleys.
http://www.jandm-machine.com/projects/canadian/projectsCanadianModelT.html

 

[vwbrian]

Adam's Antique has done many, many engines! I can vouch for him. He is in Oconomowoc, WI. 1-262-719-0758. I built my engine with Adam watching over my shoulder and was amazed at how critical he is in rebuilding model T's. He's a very knowledgeable guy.
Tell him Brian sent you.

 

[garrisonm89@yahoo.com]

Skip,
Farmallcub49 is close to you and is more than capable of doing a good job on your engine and transmission. and I'm sure he'll be more than fair on cost. He's got experience and comes with good references. Get ahold of the guys in the T-totalers. I'm pretty sure they'll vouch for him.
Mike

 

[t42]

Great response. Thank you all for the info. I will look into this in a week or so.

Skip

 

[James Rogers]

I am a little faraway but do A's and T's all the time and have no comebacks. We also do T trannys.

http://www.model-a-ford-4bangers.com/