F firerod Senior Member Sep 22, 2025 #1 Is there any way to tell the difference between Edelbrock street heads vs. race heads if the part numbers are gone?
Is there any way to tell the difference between Edelbrock street heads vs. race heads if the part numbers are gone?
big deuce Well-known member Sep 22, 2025 #2 The bottom row of head studs may need to be longer than stock lenght on the race head, don't know if Edelbrock falls into this category.
The bottom row of head studs may need to be longer than stock lenght on the race head, don't know if Edelbrock falls into this category.
T Tim Ayers Well-known member Sep 22, 2025 #3 I believe all new Edelbrocks require longer studs. If was are talking the vintage ones, what Big Deuce mentioned was generally case. Street versions worked with stock length studs. Last edited: Sep 23, 2025
I believe all new Edelbrocks require longer studs. If was are talking the vintage ones, what Big Deuce mentioned was generally case. Street versions worked with stock length studs.
big deuce Well-known member Sep 22, 2025 #4 Wasn't aware of the new stuff... thanks for posting that!
