CB919ER Senior Member Sep 5, 2018 #1 What is the name of the brass piece that goes in the carb where the fuel line attaches? My Tillitson doesn't have one and the one from my Marvel doesn't fit it. I want to swap out carbs while I send my Marvel off to be professionally rebuilt. Last edited: Sep 6, 2018
What is the name of the brass piece that goes in the carb where the fuel line attaches? My Tillitson doesn't have one and the one from my Marvel doesn't fit it. I want to swap out carbs while I send my Marvel off to be professionally rebuilt.
B Bob C Well-known member Sep 5, 2018 #2 The Tillitson shouldn't need one, the fuel line should screw right into the Tilly. Bob
Redbird Well-known member Sep 5, 2018 #3 My Tillotson carb. Just the regular gas line fitting with flared line. Attachments 20180905_183348.jpg 31.3 KB · Views: 72
dkibby Junior Member Sep 6, 2018 #4 It's a compression fitting. The "sleeve" is on the fuel line, about 1/8" from the end where it attaches to the Zenith Carb.
It's a compression fitting. The "sleeve" is on the fuel line, about 1/8" from the end where it attaches to the Zenith Carb.
redmodelt Well-known member Sep 7, 2018 #6 Some of the replacement carbs used a adapter. 1/8 pipe threads into the carb and 1/2 -20 straight threads for the fuel line.
Some of the replacement carbs used a adapter. 1/8 pipe threads into the carb and 1/2 -20 straight threads for the fuel line.
