Early Model A Right Front Fender required

M

moasew

Senior Member
I'm looking for a good right front fender for my Early 1928 Tudor restoration. I live in Eastern Canada but willing to pay for shipping for a decent fender. I've attached a photo of the type of fender I'm looking for.
 

Attachments

  • RF Fender after Blasting.jpg
    RF Fender after Blasting.jpg
    75.8 KB · Views: 85
moasew said:
I'm looking for a good right front fender for my Early 1928 Tudor restoration. I live in Eastern Canada but willing to pay for shipping for a decent fender. I've attached a photo of the type of fender I'm looking for.
Click to expand...


I can't tell if your photo is for a design 1 or design 2 fender. It is likely design 2. Refer to https://aafords.com/aa-chassis/aa-16000-fenders/#s1ff for identification of these two designs. Used on the A and AA chassis.


Sorry, I don't have any to sell.
 
Yes mine is Design 2 . I hadn't known there were three different designs. I thought there were only two :)

When I measured the fenders I already have ; one has the 7" design one and one has design 2 with 5 3/4". Both design 1 and 2 fenders would require a lot of bodywork but not totally impossible for the person who has the expertise/time to do this. I also have the latest fender in perfect shape which is the one I removed from the vehicle I'm restoring. The vehicle sustained previous damage on the right side in the early years and fenders were replaced with this latest one.

However in my quest to restore this vehicle to a visibly original car I would like to find a design 2 fender.
 
I just remeasured my left fender and it is actually 7" so a design one it is. However, I would be OK with either a design one or two for the right side.
 
Good afternoon...Bert's in Denver is known for a pretty good bone yard as is Arizona Model A. If you want to try Arizona Model A ...Sammy Guthrie 480-782-0266. Bert's has a good web site...Ernie in Arizona
 
You must log in or register to reply here.
Back
Top