door to body installation

S

Sly

Member
Hi its Stefan again,

I am trying to install the assembled doors at the car.

on the top of the door is this final tin bar which closes the top of the door.

The tin bar has a lip on the top.

This lip disables closing the door because it touches the entrance top/body.

The parts are installed correctly.

Any idea?

BR Stefan
 
Sounds like you need to do some ground work. Measure the door for height. and the opening it fits into. Check the distance from the top hinge to top of the door and the top of the opening. Make sure the top of the door panel is fitting down tightly to the inner structure. Some times the door hinges can become twisted up and need to be hammered back down. 1/8" can make a big difference to the hinge location. Let me know if this helps.

The Old Tinbasher
 
You must log in or register to reply here.
Back
Top