Distributor videos ?

BUBBAS IGNITION

BUBBAS IGNITION

Well-known member
All,

I just returned from the Vegas Automotive industry shows, and taught a " Hot Rod Ignition" three hours class at Planet Hollywood. This was for the AVI ( Automotive Video Inc) technician conference held during the shows each year etc.
After the class i was approached in regards to doing a Flathead Ford video featuring the 1932 to 1953 ignitions, service and rebuildingetc.
Whta do you guys think, is this something we could use and they could market and sell.????????

I think we could cover :
1-Crabs
2-Helments
3-49-53 units

If this project gets off the ground i would like some Ford Barn inputs from all concerned.
 
I would like to see set ups on a Sun Distributor Machine. I have the Sun, but no instruction manual.
 
Bill, I'll bet Skip or maybe Ken ct would have an instruction manual that they would copy for you. One shouldn't be too hard to come by.
 
Sounds like a good idea to me. If you need an extra pair of hands, I'd be glad to help. Best regards and good luck with the project!
 
I think that videos would be popular for anyone with original ignition. I know that I'd be interested.
 
I for one would like to see more on the helmut and possible ways to adjust and set it with out a fancy machine since they are hard to come by. .
 
count me in for a dvd . I CAN'T GET TOO MUCH LURNIN ON THESE OLD FORDS!
IF YOU ARE TEACHIN IT IT'S BOUND TO BE ONE JIM DANDY OF A VIDEO!
Thanks,
D.R. Fordestes
 
BUBBAS IGNITION said:
All,

I just returned from the Vegas Automotive industry shows, and taught a " Hot Rod Ignition" three hours class at Planet Hollywood. This was for the AVI ( Automotive Video Inc) technician conference held during the shows each year etc.
After the class i was approached in regards to doing a Flathead Ford video featuring the 1932 to 1953 ignitions, service and rebuildingetc.
Whta do you guys think, is this something we could use and they could market and sell.????????

I think we could cover :
1-Crabs
2-Helments
3-49-53 units

If this project gets off the ground i would like some Ford Barn inputs from all concerned.
Click to expand...

Sounds like a plan, I'd like to see it. I produced six videos relating to Flathead's in general, including "how to" videos. The one you're talking about, that deals strictly with '32 to '53 distributors would be good. Here's a list of the videos we have available:

Those Fabulous Flatheads (a casual look at the Flathead's history)
"Big Daddy" Don Garlits V8 Museum Tour
6 to 12 Volt conversion
Aluminum Heads & Intake Manifold Installation
From Tops to Tires (convertible tops, etc.)
1951 Ford F-1 Build.

Vic
 
You must log in or register to reply here.
Back
Top