Distributor ID

[snot275]

Got this flathead distributor from a buddy of mine and am trying to do an ID on it. It appears to be stamped or cast with "G S" or "CS". Early? Later? Aftermarket? It's a 2 bolt as well. Thanks guys!

http://www.jalopyjournal.com/forum/attachment.php?attachmentid=1908399&d=1365385099
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=1908400&d=1365385113
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=1909179&d=1365466268
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=1909180&d=1365466285
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=1909188&d=1365466304
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=1909190&d=1365466317

 

[Mike V. Florida]

I don't see anything?

 

[snot275]

For some reason it won't post... I tried multiple times...

 

[Mike V. Florida]

Send it to me and i'll try to post it. Click on my name then click email.

 

[Mike V. Florida]

"Got this distributor from a buddy of mine and am trying to do an ID on it. It appears to be stamped or cast with "G S" or "CS". Early? Later? Aftermarket? It's a 2 bolt as well. Thanks guys!"

 

[160B]

42 46 47 Ford V-8.

 

[columbiA]

Looks similar to the 42-48 ford V8 dist,but I have never seen one with the projection on each side of the hsg beside where the cap hold-down clips or bale would fit.

 

[Purdy Swoft]

I agree, it looks sort of like a flathead V8 distributor. Looking at the pics with the distributor in hand it looks WAY too small.

 

[1931 flamingo]

Post this on the EV8 board.
Paul in CT