Disc Wheels on Model A

C

Cartravel

Senior Member
I'm working on a speedster project and want to use disk wheels off a Chevy. I found the thread below but no one said they had done it. The stud circle is the same but Chevys have 6 studs rather than 5. It would be nice to buy Model A hubs and drums without the stud holes so I could drill my own. Does any one know who is making the new hubs and drums?


Previous thread:
https://www.fordbarn.com/forum/showthread.php?t=85625&highlight=chevy+disc+wheels.


This is the look I'm after:
 

Attachments

  • 184567.jpg
    184567.jpg
    61.7 KB · Views: 446
Yeah, I love the shape. The only disk wheels I've ever seen on Ts or As were either Chevy or Disteel (30"). Those bodies have also been put on an A chassis. My project is a composite - Model T Fronty engine connected to Model A drivetrain. Unfortunately, my Mercury body was very rough and missing most of the special Mercury parts. I would very much like to locate a windshield and step plates.
 
Here is a Swedish speedster with Michelin disc wheels (sorry I do not have a side view of the car):

563243


.....and here are those same Michelin disc wheels on a Tudor:

563244



....and a close up:

563245


Brad in Maryland



.
 

Attachments

  • 421674881_2508921195957169_1622843560791936524_n.jpg
    421674881_2508921195957169_1622843560791936524_n.jpg
    54.6 KB · Views: 268
  • IMG_3418.jpg
    IMG_3418.jpg
    87.3 KB · Views: 266
  • IMG_3416.jpg
    IMG_3416.jpg
    41.1 KB · Views: 268
I have demountable Motor Utilities 23" discs on my Racer - zoom-zoom !
 

Attachments

  • Racer2.jpg
    Racer2.jpg
    83.5 KB · Views: 30
Disk wheels were the "Mag" wheels of the period. I've seen lots of period ads and photos of them but few on cars today other than Chevy wheels. The maroon Mercury photo is obviously not period (color photo). I believe those are Chevy wheels since they have separate rims held on with four bolts.
 
Dodge Brothers disc wheels{Michelin} are fairly easy to find. Used from '22 to about '26. But they are heavy.
 
There was a 28 Model A delivery van at the NZ Masterton rally with disc wheels on from way back.
let me know if you want his details
Lawrie
 
A possible answer for the original post is to contact Randy Gross at 714-292-8660 or email Randy at melmodela@aol.com. Randy makes the cast iron hubs. I’m sure he could do what you are asking for.
 
You must log in or register to reply here.
Back
Top