D dmb New member Feb 26, 2025 #1 I have removed the key cylinder by drilling the small pin out. Now I am trying try to remove the toggle switch arm and locking shaft. any words of encouragement or pictures of what to do next.
I have removed the key cylinder by drilling the small pin out. Now I am trying try to remove the toggle switch arm and locking shaft. any words of encouragement or pictures of what to do next.
TerryOH Well-known member Feb 27, 2025 #2 If it is the same as 40 it is pulled straight off. The steel shaft it is pressed onto has ridge so the knob can not rotate.
If it is the same as 40 it is pulled straight off. The steel shaft it is pressed onto has ridge so the knob can not rotate.
