dash rail

P

peanut1943

Member
I have a 30ccpu and the dash rail I have has 5 screw holes and the metal on the truck only has 4 holes, what do I have?? Dwight
 
What you have is something wrong with the interior rail on the truck, I think. There is one screw in the center and two on either side...total 5.
 
That is what I have on the rail and all the screw holes line up. I also have two small holes in the center about 3" apart??? I can drill a hole in the body so that I can put the center screw in maybe.
 
Could it be you have a passenger car rail and the center hole is for mounting the instrument panel light?
 
The length of a Slant window dash is the same as the rest, it is the width of the indentation that is different, it is wider.
 
After putting the rail in place I think whoever redid the cab must have cut off the d-nut, but there is a hole that lines up in the center and I can put a screw with a washer and nut and it will work. thanks for all the help.. Dwight
 
You must log in or register to reply here.
Back
Top