3 36'cab New member Mar 28, 2025 #1 Hey Does anyone know the distance from the center bolt to the milled face on the K.R.Wilston jig to cut the rear main thrust bearing on the model A? So the crankc ends up in the right place. I also need the dimensions for the V8 jig. Thanks Leo Last edited: Mar 28, 2025
Hey Does anyone know the distance from the center bolt to the milled face on the K.R.Wilston jig to cut the rear main thrust bearing on the model A? So the crankc ends up in the right place. I also need the dimensions for the V8 jig. Thanks Leo
nkaminar Well-known member Mar 28, 2025 #2 Try the early V8 forum. https://www.fordbarn.com/forum/forumdisplay.php?f=4
