crab dist parts Q...

We actually remove the felt and clean and relube it....a real pain but we feel its worth it...:eek:

Well, I'm impressed!

Somehow I can't help but imagining a clothesline behind Bubba's house with rows and rows of tiny little felts drying in the wind :)
 
Hey Bubba,
Thanks much for sharing your vast knowledge/experience regarding distributors and their use in our hobby:)! You have validated my use of dielectric grease and belief in its benefits. I've used it for any and all electrical connection work that I do. I've never experienced any of the oxidizing and blackening of electric contacts/connections that you normally see in those after prolonged use. I also have increased auto and house bulb life with its use. I understand WD40 and will take your advice that way also. Hey, you may not know it but that wd40 is also excellent sprayed on fish lures/bait as attractant too,eh:D


The dielectric grease we use is made by 3M and a can lasts forever, a smaller portion is the MSD Spark guard.
Dielectric compound on trailer lights etc ( like a boat trailer) will insulate and water proof. The same compound used on a electronic module removes the air bubbles and allows heat to transfer.
Most late model car oems suggest using some form of dielectric grease in many applications...

100_8897.jpg


100_8898.jpg
 
Hey, you may not know it but that wd40 is also excellent sprayed on fish lures/bait as attractant too,eh:D


Really? I'll have to try that. Anything I can do to hook up with some big ones I'll try.[/QUOTE]

Hey Tim,
It's true! But, I'd advise that , prior to use, you check with your state fish/game regs book to see if any prohibition against its use. Seriously, this stuff works so well and this was recognized by some f&g people and outlawed out here in some areas. Out here some will take your gear/vehicle and first old car(besides citation)..:eek:
I'm thinking of trying a different approach,eh...say dielectric grease:D

BTW- I use the dielectric made by Permatex.
 
Last edited:
Back
Top