Copra - Chicle color combo
- Thread starter Mitch
- Start date
BRENT in 10-uh-C
Well-known member
Mitch,
I would be very careful in using Copra Drab. PPG Concept and Dupont ChromaPriemer Copra Drab are different colors - way different. Concept is a gray and Dupont is a brown. I am pretty sure that Dupont has the correct color. I bought some Concept Copra Drab to paint the trim on my 28 special coupe and I couldn't tell it from the Arabian Sand Dark (a medium to dark gray) which the main color was. I had to repaint the windshield frame with Dupont paint. The thing to remember, is to do a test spray to make sure it is what you expect.
Rusty Nelson
I would be very careful in using Copra Drab. PPG Concept and Dupont ChromaPriemer Copra Drab are different colors - way different. Concept is a gray and Dupont is a brown. I am pretty sure that Dupont has the correct color. I bought some Concept Copra Drab to paint the trim on my 28 special coupe and I couldn't tell it from the Arabian Sand Dark (a medium to dark gray) which the main color was. I had to repaint the windshield frame with Dupont paint. The thing to remember, is to do a test spray to make sure it is what you expect.
Rusty Nelson
Kevin in NJ
Well-known member
I suggest that you look at the chips in the paint book so you know what you should be getting into. Be sure to use natural light and surround the chips with a neutral color. The white makes them look dark.
My brothers coupe was done in chicle and copra and at the time they were being done with greens. When you look at the original colors they are a tan type color.
At some point I was given the original tints use in the lombard blue. That gives you a good base when you ask about the colors. You know if there was no green and they give the formula with green tints you might suspect it is not correct.
Getting colors right can be expensive and tough depending on the abilities of your local supplier. I can only wish you luck.
My brothers coupe was done in chicle and copra and at the time they were being done with greens. When you look at the original colors they are a tan type color.
At some point I was given the original tints use in the lombard blue. That gives you a good base when you ask about the colors. You know if there was no green and they give the formula with green tints you might suspect it is not correct.
Getting colors right can be expensive and tough depending on the abilities of your local supplier. I can only wish you luck.
Brent, what a striking difference the reverse is. Do you get the correct colors in PPG concept?
Brubaker, that's the other color I'm also considering.
The PPG number for chicle - copra that I have are 91 - 440 and I'm pretty sure these are grayish and not brownish like it should be. In PPG Starthane 2368 - 33006, but again I don't think these are right either.
Brubaker, that's the other color I'm also considering.
The PPG number for chicle - copra that I have are 91 - 440 and I'm pretty sure these are grayish and not brownish like it should be. In PPG Starthane 2368 - 33006, but again I don't think these are right either.
BRENT in 10-uh-C
Well-known member
Well, I hope no one takes offense but to me, having Copra as the main body color is not appealing to my likes. Again, others could/would disagree however IMHO, no car owner should ever paint a car until they have made a spray-out on a test panel and looked at it for about a month.
I guess I have seen too many customers that have thought they liked one color combination but when the stripe color changed, --or the belt moulding & main body colors were reversed, the vehicle took on a whole new look.
And yes, ....PPG can mix the correct shade however you need to verify with a spray out.
.
I guess I have seen too many customers that have thought they liked one color combination but when the stripe color changed, --or the belt moulding & main body colors were reversed, the vehicle took on a whole new look.
And yes, ....PPG can mix the correct shade however you need to verify with a spray out.
.
Brent, me neither, I prefer the chicle main body color. I just couldn't get myself to tolerate the looks of copra body color. My grandaughter wants pink with orange flames, which ain't happening either.
mot, thanks for the picture, that sure is a nice town sedan, hard not to appreciate an original.
mot, thanks for the picture, that sure is a nice town sedan, hard not to appreciate an original.
brum1
Well-known member
I had a similar challenge with matching chicle on my 30 coupe. The PPG formula matched the Copra perfectly. The chicle did not match the vehicle or the chip in the MAFCA paint guide.(looked more like grey/brown -PPG 91) Fortunately I started with only several ounces for touch up.
My solution was to take the chicle colored visor which was off the car and have it analyzed at the PPG distributor with his hand held analyzer- a perfect match for the chicle drab on my car.
Hope this helps,
My solution was to take the chicle colored visor which was off the car and have it analyzed at the PPG distributor with his hand held analyzer- a perfect match for the chicle drab on my car.
Hope this helps,
Patrick L.
Well-known member
Good info, thanks.. I've been looking into either chicle or stone for a 31..
ct50f1
Member
Although I didn't realize it 20 years ago when I was painting my car, I must have initially been using the grayish paint that you're referring to. I sprayed a test panel and was very disappointed because it wasn't anything like the original paint that I found on the car. I ended up taking a hood panel (chicle) and the rear apron (cobra) to the paint dealer and had them match the original paint color that was on the underside of these panels. I'm fairly happy with the results although what I've got now is a custom color that would be impossible to match if I needed to do any touch-up.
Bill Stipe
Senior Member
Here is my 31 Tudor I used PPG but I had the paint supply co remix the colors the first time I sprayed a test panel it just didn't look very rich the colors just didn't seem right so I don't know if this is a good true example but I would not change it for myself I love the colors.
Bill Stipe
Bill Stipe
