DerekB
New member
I fixed my horn issue and am now trying to put the light switch back together.
I know the spider goes north and south.
I know the first half goes on the column in only one orientation because of the notch at the bottom.
I know the second half of the housing goes on with harness hole on top, and drain hole on the bottom.
Here’s my problem. I don’t know how to orient the black connector box inside that housing. The housing has a cutout notch, and so does the black plastic part. Nothing seems to protrude to fit in their respective notches. So, I don’t know how it’s supposed to be oriented. The attached photo shows the two “negative” notches. Thanks!
I know the spider goes north and south.
I know the first half goes on the column in only one orientation because of the notch at the bottom.
I know the second half of the housing goes on with harness hole on top, and drain hole on the bottom.
Here’s my problem. I don’t know how to orient the black connector box inside that housing. The housing has a cutout notch, and so does the black plastic part. Nothing seems to protrude to fit in their respective notches. So, I don’t know how it’s supposed to be oriented. The attached photo shows the two “negative” notches. Thanks!
