corvette8n
Well-known member
He obviously knows what he’s doing, congratulations.
Congratulation Ronninroadster !!
- Thread starter 34fivewindow
- Start date
Ronnieroadster
Well-known member
Just got back from the trip to Maine. Here's the numbers from the two test runs.
On my first run the mile speed was 190.708 and at the mile and a half the speed was 207.046
For the second run I decided to change the gear in the quickchange to see if the engine which is 292 cubic inches would pull a taller gear.
The second run at the mile the speed was 191.438 and at the mile and a half the speed was 208.442. Latter I will post a nice in car video of the 207.046 run so everyone can experience all the excitement.
Thanks everyone for the compliments.
Ronnieroadster
On my first run the mile speed was 190.708 and at the mile and a half the speed was 207.046
For the second run I decided to change the gear in the quickchange to see if the engine which is 292 cubic inches would pull a taller gear.
The second run at the mile the speed was 191.438 and at the mile and a half the speed was 208.442. Latter I will post a nice in car video of the 207.046 run so everyone can experience all the excitement.
Thanks everyone for the compliments.
Ronnieroadster
Ronnieroadster
Well-known member
All runs were made using VP racing gasoline.
Ronnieroadster
Well-known member
V8COOPMAN
Well-known member
As usual....SPECTACULAR! I saw 64-6500 going through the traps, and saw 135-ish on the oil pressure on occasion. Unreal, what YOU guys are doing, Ron! DD
19Fordy
Well-known member
CONGRATULATIONS Ronnie. Also, thanks for the ARDUN education video I just watched on HAMB.
https://www.jalopyjournal.com/forum/threads/how-does-a-set-of-ardun-heads-work.1235807/
https://www.jalopyjournal.com/forum/threads/how-does-a-set-of-ardun-heads-work.1235807/
Talkwrench
Well-known member
V8COOPMAN
Well-known member
V8COOPMAN
Well-known member
Blownflatheaddeuce
Senior Member
Outstanding Ron, kudos to you, Jnr and Laura on this achievement !!