Fat Fender
Member
I've recently rebuilt a 59AB and put in a 4" crank. Compression after all was said and done is about 110 lbs on all cylinders (give or take ~5 lbs).
Engine runs great, but the temp is always about 110 degrees plus ambient. So at a 90 degree outside reading, I'm running at ~200 degrees. This to High? Does the higher compression lead to more engine temp?
BTW, I'm running Skips pumps, Water Wetter, 50/50 mix anti-freeze, dual exhausts, and stats (180) installed.
Thanks for any experience/info.
Fat Fender
Engine runs great, but the temp is always about 110 degrees plus ambient. So at a 90 degree outside reading, I'm running at ~200 degrees. This to High? Does the higher compression lead to more engine temp?
BTW, I'm running Skips pumps, Water Wetter, 50/50 mix anti-freeze, dual exhausts, and stats (180) installed.
Thanks for any experience/info.
Fat Fender