Coil Identification

[Joe KCMO]

I have several coils which fit my 2 screw 39 distributor(I think it is?). One coil has a ford script with the condenser attached to one of the mounting screws. Another ford script coil has a condenser which attaches to the bolt which mounts the distributor to the motor. Please help me identify these coils. The condenser which bolts to the motor will not fit the coil with the condenser which is connected to one of the two screws. I also have aftermarket coils one of each described above. What is correct for a 39.

 

[TerryOH]

the 39, 85 HP condenser center terminal mounts to the brass tab coming out of the side of the coil. and has a flat steel grounding ******** the side, which is attached to ground with one of the mounting bolts of the distributor. The condenser mounts vertically next to the coil. If you could post photos of what else you have it can be identified. The other coil for 85 HP with two mounting screws is the late 36, one of it`s mounting screws is toward the rear of the coil and the other near the front, this coil has a low cylinder shape with a flat top.