28CCPU
Junior Member
- City
- Tempe
- State
- AZ
- Price
- 425
Set of front and rear brake backing plates (1939-1942 less hardware) machined to bolt on to a Model A. Includes the adaptor rings and spacers to adapt 1939-1948 front backing plates to 1928-1936 ford spindles. Purchased these from Dennis Cling last year and they have been sitting in the box since. Dennis supplied the backing plates and performed all of the modifications. Again, there is NO hardware included, only front and rear backing plates and the front adaptor rings and spacers. Price is $425 shipped. Description from Clings Aftermarket Website:
Rear Backing Plates machined to bolt on Model A in upright position.
Includes :
Weld hold plugs into original holes.
Machine welds flush.
Machine new mounting holes.
Machine spring perch cut out.
Machine outer flange to eliminate axle shim.
P/N 4103 spring porch cut out and dust cover supplied.
Front Backing Plates machined to bolt on Model A.
Includes:
Weld hold plugs into original holes.
Machine welds flush.
Machine new mounting holes.
Rear Backing Plates machined to bolt on Model A in upright position.
Includes :
Weld hold plugs into original holes.
Machine welds flush.
Machine new mounting holes.
Machine spring perch cut out.
Machine outer flange to eliminate axle shim.
P/N 4103 spring porch cut out and dust cover supplied.
Front Backing Plates machined to bolt on Model A.
Includes:
Weld hold plugs into original holes.
Machine welds flush.
Machine new mounting holes.
Attachments
Last edited: