Ceramic coating exhaust manifolds

J

Jim Griffith

Junior Member
Gentlemen,
I am thinking about having the exhaust manifolds (Fenton) on one of my flatheads ceramic coated. I am sure that some of you have had experience with this and I would appreciate some feedback. Additionally, does anyone know of a source for the ceramic coating process in the Dallas/Fort Worth area?

Thanks,
Jim Griffith
 
I have two I had coated when I bought them from Patrick's, no problems
as for the Dallas area, a person might google Jet hot coatings and see whats available.
 
I have Fenton's from Patrick's installed that I had Jet Hot coated inside & out when new over 15 years ago. They still look good. At that time I sent them to Jet Hot in Pascagoula Miss.
 

Had these made for my 35 21 stud motor a couple years ago and jet hot coated. can't wait to fire her up....... one day!!
 
had my ex/headers, intake , valve covers ,on my 34 cp. w/boss 429 eng done 19 years ago when the coating first came aval. they still look great, a little duller than 19 yrs ago . i have all the cars i have built coated.
 
I had Patrick's coat mine when I bought them, Since you already have yours it might be a good idea to check the gasket flanges with a straight edge to make sure they are true as to avoid sealing problems, better to resurface before they are coated, just a little tip from past experience!
Good luck ,
D.R.Estes
 
You must log in or register to reply here.
Back
Top