Carpet Purchase Advice, Fiasco

Jwawhite

Jwawhite

Well-known member
Do not purchase your carpet from Auto Custom Carpets, Inc. out of Alabama, you may be disappointed about the product.
Three days to go for a Car Show a bit over 100 miles away to meet up with my brother. We rarely see each other and I was looking forward to seeing him. All the more meaningful for this would be our last car show together, my wife and I are done with California.
I installed the underlayment and turned my attention towards the carpet. Laying out the carpet it was readily apparent of poor craftsmanship. This by far was my worst aftermarket purchase.
Three pieces of carpet, the front piece fit poorly and I was just going to accept it and move onto #'s 2 and 3. The two pieces did not fit, the transmission tunnel on the carpets weren't correct. Too much material. Lastly, #3 the holes did not line up for the two piece rear seat bolts and no finishing strip on the edge.
I was in a bind, went over to an upholstery shop, the carpet was ripped apart resewn, edge piece sewn on and installed, $200.
 

Attachments

  • 20180909_135414.jpg
    20180909_135414.jpg
    14.1 KB · Views: 56
  • 20180831_144605.jpg
    20180831_144605.jpg
    81.2 KB · Views: 85
Last edited:
Auto Custom Carpet is about the only place to get old car carpets as far as I know. Any where else to get 54 carpets? I was thinks about buying from them for my 54.
 
I'd recommend your local upholstery shop. Remove the seats yourself and end up with a superior product and fit. You can get the price of a premade carpet vs shops....
Forgot to mention my carpet kit did not have jute padding for under the rear seat, quite a large area. I applied two superior products for sound and heat.
Look at the poor fit on front carpet
 

Attachments

  • 20180903_153810.jpg
    20180903_153810.jpg
    82 KB · Views: 46
Its always good to read unfiltered feedback from Forum members of individual vendors and or products or services. All are appreciated, both good and bad.
 
My '59 carpet was from ACC too. The rear piece fit fine. The front was about 3/4" too narrow in the width, I split it so I have about a 3/8" gap on either side. I shot some black paint under it so it hardly shows. I think my purchase was 1 size fits "some".


I did lay it out in the hot sun on my deck all day before we installed it.
 
I ordered from ACC as well, and it was not a good fit at all. The color was great, but all kinds of problems with seams not matching up, puckering, etc. From what I could tell it just looked like they added too much extra carpet to every panel that they had sewn together. Both pieces laid down horribly. Problem for me was that I had purchased the carpet set from them quite some time ago (9 months ahead as I recall) before installation. Big mistake on my part, lesson learned there. In the end it all looks ok I guess.

After looking at stockinteriors.com I could swear the carpet for the 55/56 sedans are the same excact copies of what ACC has to offer. Makes me wonder...
 
Last edited:
I get the best quality carpet I can and fit it myself. There are some tricks to get the proper fit on the hump. Older cars with relatively flat floors are the easiest ones to fit. The later ones with deep tunnels get harder the deeper the tunnel gets but it can be done. My old Consew sewing machine will punch through it all OK but it isn't easy to fit because of the weight & thickness of it all. A lot of the carpet that is moldable is fairly thin and isn't always the best quality.

I just wish I had a good serger machine. It can make doing the edges easier but sewing on matching vinyl edges looks good if done correctly by hiding the stitching in the carpet. Some edges can be hidden under the sill plates if they were designed that way
 
For the most part, Stock Interiors sells ACC carpets. I ordered a carpet from Stock Interiors for my (now sold) 64 Fairlane and it came direct from ACC. It was the wrong carpet and they took it back no problem though



Hot Rod Reverend said:
I ordered from ACC as well, and it was not a good fit at all. The color was great, but all kinds of problems with seams not matching up, puckering, etc. From what I could tell it just looked like they added too much extra carpet to every panel that they had sewn together. Both pieces laid down horribly. Problem for me was that I had purchased the carpet set from them quite some time ago (9 months ahead as I recall) before installation. Big mistake on my part, lesson learned there. In the end it all looks ok I guess.

After looking at stockinteriors.com I could swear the carpet for the 55/56 sedans are the same excact copies of what ACC has to offer. Makes me wonder...
Click to expand...
 
It appears to me that all carpets sold thru Ebay are made by Auto Custom Carpets, no matter who distributes them, with bad feed back on the carpet fit.
Better to go to a trim shop, I think
Jim
 
Last carpet I bought from ACC was for of all things a 74 Pinto, was to narrow at the footwells and hump was way to high. Did my best to get the hump stretched down and pulled out to the edges, never was satisfied. I see on the mustang sites that the people are ordering direct from ACC and ordering the carpets untrimmed. When I ordered I didn't know that, but have not tried since do to all the unsatisfied people.
 
5851a said:
I see on the mustang sites that the people are ordering direct from ACC and ordering the carpets untrimmed. When I ordered I didn't know that, but have not tried since do to all the unsatisfied people.
Click to expand...


... hmmpf ...


That is good to know. Forming the hump is a pain.
 
I believe ACC and Stock Interiors are related. One office is in MA and the other in Birmingham Alabama.
 
You must log in or register to reply here.
Back
Top