Can't identify this part

[johnr9q@yahoo.com]

It is conical shaped. It is either part of the steering box or the horn assembly in the steering wheel.

 

[Mark A Johnson]

Its a shim for the radius ball.

 

[Gary WA]

It is conical shaped. It is either part of the steering box or the horn assembly in the steering wheel.

looks like a radius ball fix washer?

 

[Y-Blockhead]

Radius ball shim washer.

 

[Ruth]

Looks like the shim to bandaid a worn out radius ball.

 

[The Master Cylinder]

Either a Oil seal retainer for a two tooth steering box or a fix for a worn radius arm ball.

 

[johnr9q@yahoo.com]

It's not for the radius ball. As you can see in the picture it is not round but has a little curve to it. The Master Cylinder: As you say, it must be an Oil seal retainer for a two tooth steering box. Where does that go?

 

[WTSHNN]

Is it this?
https://www.snydersantiqueauto.com/product.htm?pid=977837&cat=41748

or this?
https://www.snydersantiqueauto.com/product.htm?pid=977770&cat=41738