- City
- Santa Rosa
- State
- Calif.
- Price
- In Ad
I am been listing the last of my Borg Warner Overdrive stuff. I will not be using these and would like to pass them on to someone that is looking for a way to add an overdrive at a very low cost. At this cost a overdrive conversion can be had for less than than a complete trans rebuild. Please contact me with any questions. Photos are available via email!
#1 Complete except for the input shaft and 1/4" spacer, 12v but I may have a 6v solenoid. This unit is disassembled and will require assembly. $400.00 Frt. extra may trade for parts
Extra parts included:
1- Planetary gear assembly. with free wheel clutch
1- Free wheel clutch
3- Manual fork control assembly.
2- Pawls
1- Sun gear control and plate
2- Retainer plates
1- Manual control assembly
1- Speedo gear
#2 Complete except for missing coupler output to pinon shaft, this unit is completely assembled, does not have a Governor, hole plugged along with speedo. Governor not needed, plug for speedo can be removed and cable drive installed. $400.00 Frt. extra May trade for parts. I have the weights and box sizes so I can get an approx. shipping cost.
Steve callcoy1@aol.com 707-579-0338
#1 Complete except for the input shaft and 1/4" spacer, 12v but I may have a 6v solenoid. This unit is disassembled and will require assembly. $400.00 Frt. extra may trade for parts
Extra parts included:
1- Planetary gear assembly. with free wheel clutch
1- Free wheel clutch
3- Manual fork control assembly.
2- Pawls
1- Sun gear control and plate
2- Retainer plates
1- Manual control assembly
1- Speedo gear
#2 Complete except for missing coupler output to pinon shaft, this unit is completely assembled, does not have a Governor, hole plugged along with speedo. Governor not needed, plug for speedo can be removed and cable drive installed. $400.00 Frt. extra May trade for parts. I have the weights and box sizes so I can get an approx. shipping cost.
Steve callcoy1@aol.com 707-579-0338
Last edited: