Bellhouse hardware

[Harpkatt]

It seems I've neglected to find hardware for my tranmission bellhouse. Can someone clue me in to the the bolt size? Is this a specific Ford hardware?

 

[kenparker]

are you refering to the bolts that hoold the transmission to the bellhouse or the bolts that hold the bellhouse to the flywheel cover???

 

[jw hash]

bell housing to flywheel housing 3/8 X 1" NC, bell housing to transmission 7/16 X 1" NC I could be a little off on the length.

 

[Harpkatt]

Thanks guys. I needed the hardware for both.

 

[kenparker]

The bellhouse to Transmissions bolts are 1/2" dia x 1 1/4" long with a head that takes a 3/4" wrench.



The bellhouse to flywheel cover bolts are 3/8" dia x 1 1/4" long and the head takes a 9/16" wremch and there (I think) twelve of them. The original head had a dome on it. ken

 

[kenparker]

oops left out picture

 

[Stew Masche]

You can try www.fordbolts.com

 

[Benson]

wrong post

 

[DD931]

The four bellhousing to transmission bolts are Grade 5 (three marks on the head).