bad fuse block

[jax55]

Good point Tom and Master Cylinder I too am confused now too.
I am putting this in the fuse holder at the starter, so "Batt" would be at the wire connection clip end from the battery post. Right? It kind of goes against "logic" to put the "batt" toward the load. Right? At $11 apiece it is hard to have them not work with no recourse of getting my money back.
Yep, I'm confused alright.

 

[Mitch//pa]

Good point Tom and Master Cylinder I too am confused now too.
I am putting this in the fuse holder at the starter, so "Batt" would be at the wire connection clip end from the battery post. Right? It kind of goes against "logic" to put the "batt" toward the load. Right? At $11 apiece it is hard to have them not work with no recourse of getting my money back.
Yep, I'm confused alright.

U paid a lot for yours

 

[Mitch//pa]

The aux goes towards the load or electrical component being operated. batt goes towards the battery

 

[jax55]

Thanks Mitch, that is what I thought on both counts.

 

[Mike V. Florida]

The aux goes towards the load or electrical component being operated. batt goes towards the battery

As most cars have a negative ground, your statement would be correct. On the Model A and Positive ground cars, it would be the other way around.

 

[Tom F OHIO]

Mike where are these available? What about the 12 volt? Is it available in 6 VOLT? Thanks a million RAY

Ray, I bought mine at napa right off the shelf where the fuses are.