are these 34 ford hood sides or?

[neil lewis]

Just trying to figure what these hood sides fit. They look like 33 34 ford car but the back bottom doesn't round like the other ones I seen. Thanks for any help.

 

[David J]

NO and no clue what they are for .

 

[39topless]

What ever they are, they sure look nice.

 

[FL&WVMIKE]

Maybe, someone on the AACA Forum, (forms.aaca.org) could identify them.
MIKE (mikeburch)

 

[Manuel]

They look like Dodge / Plym from here.

Manuel in Oz

 

[Dak Rat]

I'm guessing '32 Plymouth.

 

[Drbrown]

Here's my Dad's '32 Ply 2DR and I had a '32 4DR in the '50's. The hood is hinged in the center and each half was is a hinged 2-piece. The bottom edges are relatively straight-flat, and each side had a locking twist handle at the bottom edge. When folded open/up, the arrangement provided lots of working space.

Loved that car. Had a big bore 4 cyl, up-draft carb, nice ****** ratios and lots of torque. Milled the head and added two pipes .... In-tune, could stay with any early stock '50's flat head off the line for two city blocks.

 

[southfork]

yes, pretty sure that they are Plymouth.

 

[Tudortomnz]

Could be '33 '34 Plymouth. There were a few different models in each year & in '34 there were different style louvres between the models. I had a '34 with sides just like those pictured.
WT.

 

[V8COOPMAN]

Could be '33 '34 Plymouth. There were a few different models in each year & in '34 there were different style louvres between the models. I had a '34 with sides just like those pictured.
WT.

Well, not quite "just like those pictured".......'34 Plymouth PE hood, and a '34 PF hood in the middle. Don't think it's a '34 Plymouth. DD

 

[Fordors]

It is '33 Plymouth PC. Somebody gave me a full PC hood years ago thinking it was a Ford hood. Darned if I can remember who gave it to me, but regardless, I sold it to Tom Rootlieb who used it to pattern Dodge/Plymouth hoods. There was much marketing confusion in '33, Plymouth had a PC, PCXX, and there was a PD. PC and PCXX had 107" wheelbases as compared to the PD's 112". The extra length in the wheelbase is from the firewall forward requiring two different hoods for '33's.

 

[mercman from oz]

It seems that there are 2 different Hoods on 1933 Plymouths? On one model, the rear louvre is at an angle, however, I did see this picture of a 33 Plymouth which has a similar looking hood to the ones pictured.

 

[mercman from oz]

Here is a bigger picture of that 1933 Plymouth with the hood that looks like the one in question.