Al Blatter Flow Testing jets

[RonC]

Al Blatter had an article in the magazine Skinned Knuckles around the early 80's about flow testing jets. Does anyone know what issue that was? I would like to get a copy of that article.

 

[Colonel Biggs]

He wrote an article for The Model A News, entiltled "Carburetor Orifices Test." It was the January-February 1983 edition. I don't recall a Skinned Knuckles article around that era.

 

[Steve Plucker]

Here are some other articles on jet testing:

CARBURETOR JETS​

“Carburetor Orifices Test(ing)”: MAN/30/1/16-18 (1983)**5
“Carburetor Jets”: MAN/32/2/24 (1985) **6
“Flow Testing Zenith Jets”: MAN/40/6/13-15 (1993)
“Zenith Jet Numbering”: MAN/43/2/19 (1996)
“Model “A” Zenith Carburetor Jets”: MAN/44/1/20-23 (1997)
“Model “B” Zenith Carburetor Venturi Sizes”: MAN/45/2/12 (1998)
“TIP…Carburetor Jet Size”: TR/46/5/46 (2002)​

“Carburetor Jets---The Good and the Bad”: MAT/1/1/35 (2005)

Pluck

 

[1930 coupe]

This might help

The pictures were larger and easier to read before I uploaded.
It seems like Ford Barn shrinks pictures down automatically when they are uploaded.

 

[RonC]

Thank you all this helps!

 

[BILL WILLIAMSON]

If you SOLDER up your jets & re-drill them to original sizes, with QUALITY jet drills, YOU'LL BE GOOD TO GO!---A HOLE is jist a HOLE-(CHEEP, TOO!)
Bill Drilling

 

[katy]

1930 coupe, any chance to get a larger version of them pages? Perhaps email them to me?
TIA, Ken

 

[1930 coupe]

I do not know how to make the pictures larger so they can be read easier.
If someone knows how, and wants to post the pictures larger for all to see, let me know and I will email the large pictures to you so you can post here for all to see.